Trolling Control Unit for KE-4 & KE-6 - 24 Volt (306364)

KE Engine Trolling Systems



Used extensively in the game fishing industry for controlled low speed continuous operation whilst trolling, where lower speeds are required than the vessel would
normally make at in gear idle. Suits both electronic and mechanical hydraulic actuated



How to Order KE Trolling:




For Electronically Actuated Hydraulic Trolling Valve you will need:



•Trolling Control Unit, 306263 - one required in either single or dual engine applications.
Electronic box with plug-in connectors for electrical cables to connect trolling switch(es), harness(es), and main KE system.


• Trolling Output Harness, 306372 - one for each engine harness to connect the control unit to the transmission input/output.


• Trolling Com/Power Harness, 306301 - one required in either single or dual engine applications. Power input and connection for main KE system.


• Trolling Slave Harness, 306374 - one required in dual engine installations only.
Connects the communication harness to the main KE port control unit.


• Trolling Switch, 306388 - one required for each station. Activates the trolling function.


• Trolling Switch Harness, 306384/86/87 - one required for each station.
Connects the trolling switch to the trolling control unit.


• Communication Harness, 306278/79/80 - one required in dual engine installations only. Viewable in "Related products"




For Mechanically Actuated Hydraulic Trolling Valve you will need:



• Trolling Control Unit, 306362 12V or 306364 24V - one required for each engine. Electronic box with plug-in connectors for electrical cables to connect trolling switch(es), harness(es), and main KE system.


• Trolling Actuator, 306261 - one required for each engine. Electrical/mechanical change over box. Mechanical cables purchased separately to connect to transmission. CC633, SP33C, CC330,
33C type cables used.


• Trolling Actuator Harness, 306377 - single engine or 306378 - dual engine - one required. Connects the trolling actuator to the trolling control unit.


• Trolling Com/Power Harness, 306301 - one required in either single or dual engine applications. Power input and connection for main KE system.


• Trolling Slave Harness, 306374 - one required in dual engine installations only. Connects the communication harness to the main KE port control unit.


• Trolling Switch, 306388 - one required for each station. Activates the trolling function.


• Trolling Switch Harness, 306384/86/87 - one required for each station. Connects the trolling switch to the trolling control unit.


• Communication Harness, 306278/79/80 - one required in dual engine installations only. Viewable in "Related Products".


• Mechanical control cable(s) - one required for each transmission. Connects the trolling actuator to the trolling valve linkage.